
Programming
Incoming call barring (Caller ID subscribers only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls.
When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call.
Important:
RWhen the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list
(page 43) with after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call barred list.
Important:
RYou must store the phone number with an area code in the call barred list.
nFrom the caller list:
1 MFN ()
2 MbN: Select the entry to be barred. a
a
3 MbN: “Caller Barred” a 
4 MbN: “Yes” a a M
N
nBy entering phone numbers:
1 (middle soft key) #217 a
2Enter the phone number (24 digits
max.). a
R To erase a digit, press .
3MN
Viewing/editing/erasing bar call numbers
1 (middle soft key) #217
2MbN: Select the desired entry.
R To exit, press MN.
3To edit a number:
a Edit the phone number. a
a M
N
To erase a number:
a MbN: “Yes” a
a M
N
Note:
RWhen editing, press the desired dial key to
add, to erase.
Setting call restriction
You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.
1 (middle soft key) #256
2Enter the base unit PIN (default: “0000”). R If you forget your PIN, contact an
authorised service centre.
3Select the handsets to be restricted by pressing 1 to 6.
R All handsets registered to the base unit are displayed.
R “” is displayed next to the selected handset numbers.
R To cancel a selected handset, press the same dial key again. “” disappears.
4
5Select a memory location by pressing 1 to 6. a
6Enter the phone number or area code to
be restricted (8 digits max.). a a
MN
R To erase a restricted number, press
.
Changing the base unit PIN (Personal Identification Number)
Important:
RIf you change the PIN, please make note of your new PIN. The unit will not reveal the
35
2012/04/27 20:24:46