27
Preparation
Setup Your Computer
Installing UDF Reader
Caution:
BUse the computer on AC power (not battery) to avoid power-down during
setup.
1Insert the floppy disk into floppy disk drive.
(Refer to “How to Make the CB30A Driver Installation Floppy Disk” on p.45.)
2Double-click [My Computer] icon on the screen, then double-click
[A:] (if the floppy disk drive is A).
3Double-click [Dsetup.exe].
Setup window appears.
(Go on to 4 on next page)
The UDF Reader supplied with this drive is for Windows 98SE / Windows Me /
Windows 2000.
For Windows 2000, log in as a member of the users of Administrator group when
installing.
Installing UDF Reader from Floppy Disk
CB30A Driver
1Insert the supplied CD-ROM into
the drive.
The program starts automatically, then
Setup Menu appears.
Installing UDF Reader from CD-ROM
Notes:
BIf the program does not start automatically, open My Computer and
double-click CD-ROM icon, then double-click [Asmenu.exe ] in the
CD-ROM to start Setup Menu.
BFor Windows 98SE, use a working drive other than this drive for installation.