Before using
ªConnecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
1 |
1Connect the AC mains lead to the AC adaptor and the AC mains socket.
2Connect the DC input lead to the AC adaptor.
3Connect the DC input lead to this product.
≥The output plug of the AC mains lead is not completely connected to the AC adaptor socket. As shown in 1, there is a gap.
≥Do not use the power cord for other equipment since the power cord is exclusively designed for the movie camera. Or do not use the power cord of other equipment for the movie camera.
ªFitting the battery
Push the battery against the battery holder and slide it until it clicks.
ªRemoving the battery
While sliding the [BATTERY] lever, slide the battery to remove it.
BATTERY
≥Hold the battery with your hand so it does not fall.
≥Before removing the battery, be sure to set the [OFF/ON] switch to [OFF].
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
10
VQT1L48
