Before using
Charging time and recordable time
The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer.
Supplied | A | 1 h 40 min |
battery/ | B | 1 h 15 min |
(7.2 V/ |
| (1 h 10 min) |
640 mAh) | C | 30 min |
|
| (30 min) |
A | 2 h 40 min | |
(7.2 V/ | B | 2 h 10 min |
1320 mAh) |
| (2 h) |
| C | 55 min |
|
| (55 min) |
A | 4 h 55 min | |
(7.2 V/ | B | 4 h 25 min |
2640 mAh) |
| (4 h 5 min) |
| C | 1 h 55 min |
|
| (1 h 50 min) |
A | 10 h 30 min | |
(7.2 V/ | B | 10 h 10 min |
5800 mAh) |
| (9 h 25 min) |
| C | 4 h 30 min |
|
| (4 h 10 min) |
ACharging time
BMaximum continuously recordable time C Actual recordable time
(The actual recordable time refers to the recordable time on a tape when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever, etc.)
“1 h 10 min” indicates 1 hour 10 minutes.
≥The charging time and recordable time shown in the table are approximations. The times indicate the recordable times when the viewfinder is used. The times in parentheses indicate the recordable times when the LCD monitor is used.
≥We recommend the Battery Pack
≥The actual time may become shorter than this. The recordable time shown in the table are approximations. The recordable time will become shorter in the following cases: ≥When you use both the viewfinder and the
LCD monitor simultaneously while rotating the LCD monitor frontward to record yourself, etc.
≥When you use this camera with the LCD monitor lit up with the [POWER LCD] setting.
≥The batteries heat up after use or charging. The main unit of the movie camera being used will also heat up. This is normal.
≥Along with the reduction of the battery capacity,
the display will change: 
# 
#
# 
# 
. If the battery
discharges, then 
( 
) will flash.
Turning the camera on
When the camera is turned on with the lens cap fitted, the automatic white balance adjustment
ªHow to turn on the power
1While pressing the button 1, set the [OFF/ON] switch to [ON].
1
OFF | ON |
≥The Status indicator lights red and the power turns on.
≥In Tape Recording Mode or Card Recording Mode, if the [OFF/ON] switch is set to [ON] while the LCD monitor is closed and the viewfinder is retracted, the power turns off.
ªHow to turn off the power
1While pressing the button 1, set the [OFF/ON] switch to [OFF].
1
OFF | ON |
≥Set the [OFF/ON] switch to [OFF] when not using the camera.
≥The status indicator goes off when the power turns off.
11
VQT1L48
