With a PC

ªNotes

Do not disconnect USB cable while the status indicator of the movie camera is on. It may freeze the software or destroy the data in transfer.

When the movie camera is switched to the PC connection mode while it is connected to the personal computer, the operation mode of the movie camera cannot be switched. In this case, disconnect the USB cable. Switch the operation mode of the movie camera and reconnect the cable.

If the movie camera is used as a Web Camera, the quality of the video to be exchanged will depend on the Internet connection status.

In the Web Camera mode, video (picture) cannot be recorded onto a tape or a card.

In the Web Camera mode, the audio may be interrupted in the midway of communication depending on the communication environment or the performance of the personal computer.

If you connect the USB cable while you operate a tape in the tape playback mode, the tape will be stopped.

If you connect the USB cable in the Web Camera mode (tape recording mode), the time code indication, the SP/LP indication, or icons disappear.

In the Web Camera mode (tape playback mode), the operation icon is changed.

If the movie camera is used as a Web Camera while virus checking software is running, the movie camera’s operation may stop midway through. In this case, exit the Messenger, reconnect the movie camera and restart the

Messenger.

We recommend using AC adaptor as the power source for the movie camera when connecting to the personal computer. Data may be lost if the battery power is lost while transferring.

Do not delete the folders in a card. The card may not be recognised if deleted.

If you install the USB Driver while the USB cable is being connected, or if you don’t follow these operating instructions, the movie camera will not be recognised correctly. In this case, delete the driver from [Device Manager] as described below, uninstall the driver, and re-install it.

Set the movie camera to tape recording mode, tape playback mode or PC connection mode, connect it to the personal computer, and delete [DVC] or [Web-Camera] from [Device Manager].

62

VQT1L48

Page 62
Image 62
Panasonic NV GS 330 operating instructions VQT1L48