With a PC

To use the movie camera as a Web Camera, the following conditions must be met.

To upgrade Windows XP to SP2, click [start] >> [All Programs] >> [Windows Update]. (Requires internet connection.)

To upgrade Windows 2000 to SP4, click [start]

>> [Windows Update]. (Requires internet connection.)

If the installed version is not latest, update it by performing the Windows update.

Depending on the security setting on PC, proper communication will not be possible.

The other parties also need to use same Messenger software during the communication.

Card reader function

OS:

IBM PC/AT compatible personal computer with pre-installed;

Microsoft Windows Vista

Microsoft Windows XP

Microsoft Windows 2000

CPU:

Windows Vista: Intel Pentium III 1.0 GHz or higher

Windows XP/2000: Intel Pentium III 450 MHz or higher

RAM:

Windows Vista Home Basic: 512 MB or more Windows Vista Home Premium/Ultimate/ Business/Enterprise: 1 GB or more Windows XP/2000: 128 MB or more (256 MB or more recommended)

Interface:

USB port

Other requirements:

Mouse or equivalent pointing device

Install/Connection

ªInstalling USB Driver

Install this when your OS is Windows XP SP1, or Windows 2000 SP4.

(When your OS is Windows Vista/Windows XP SP2, installing USB Driver is not needed.) USB Driver is needed to be installed when you connect the movie camera to the PC with the supplied USB cable and use SweetMovieLife/ MotionDV STUDIO or Web Camera.

DirectX 9.0b is installed in your PC if it is not installed beforehand. Applications which are compatible with older version of DirectX may not operate properly by installing DirectX 9.0b. In this case, consult the manufacturers of the applications disabled.

1Insert the supplied CD-ROM into the personal computer’s CD-ROM drive.

Quit all applications.

The [Setup Menu] screen appears.

2Click [USB Driver].

The set up programme starts running.

3You may be required to install DirectX 9.0b depending on the environment of the personal computer. In this case, click [Yes] to install it.

Reboot the computer after DirectX is installed.

Do not take out the CD-ROM.

4Finish installation by following the on- screen instructions.

Click [Next] and proceed with installation. After completing the installation, click

[Finish].

Reboot the computer to finish installing USB Driver.

53

VQT1L48

Page 53
Image 53
Panasonic NV GS 330 Install/Connection, Installing USB Driver, Card reader function, Click USB Driver