Before using
9
VQT1L48
The grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
Power supply
ªCharging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (-11-)
≥We recommend using Panasonic batteries. (-6-)
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
1Connect the AC mains lead to the AC
adaptor and the AC mains socket.
2Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
ªCharging lamp
Lights up:Charging
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
1
2
3
VQT1L48_ENG.book 9 ページ ２００７年１２月１１日　火曜日　午後４時５５分