With a PC
≥When you use Windows 2000 (SP4) to connect the personal computer and the movie camera by USB cable and then use MotionDV STUDIO, installing the USB driver is needed.
1Insert the supplied
≥Quit all applications.
≥The [Setup Menu] screen appears.
2Click [MotionDV STUDIO 6.0E LE].
≥After reading the displayed contents, please carry out the installation according to instructions.
3Select the video system.
4After the completion of setup, click on [Finish].
≥Sample data is installed concurrently with the MotionDV STUDIO.
≥After installation, if you click [MotionDV
STUDIO 6.0E LE] in the Setup Menu, the uninstallation starts. Click [EXIT] in the Setup Menu to close the Setup Menu.
ªConnecting the movie camera to personal computer
Confirmation before connection
When you connect the personal computer and the movie camera with the USB cable and then use SweetMovieLife/MotionDV STUDIO on Windows
Vista, Windows XP (SP2) or Windows 2000 (SP4), check the driver of the USB host controller.
≥It is required to use the driver for which [Microsoft] is displayed on [Driver Provider] in [Driver] tab.
(for Windows XP/2000)
1Select [start] >> [Settings] >> [Control Panel] to start [System].
≥[System Properties] is displayed.
2Click [Hardware] tab and then click [Device Manager].
3
≥The indication [Enhanced Host Controller] is changed as [EHCI] depending on the host controller you use.
4Click [Driver] tab to check the description on [Driver Provider].
≥If [Microsoft] is displayed on [Driver Provider], the confirmation procedure is completed.
(for Windows Vista)
1Select [start] >> [Control Panel] >> [System and Maintenance] to start [Device Manager].
2
≥The indication [Enhanced Host Controller] is changed as [EHCI] depending on the host controller you use.
3Click [Driver] tab to check the description on [Driver Provider].
55
VQT1L48
