Panasonic NV GS 330 operating instructions Audio dubbing, To cancel the standby for recording

Edit mode

ªTo cancel the standby for recording

When the camera is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select

the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy guard) is recorded by the movie camera, the picture is distorted by mosaic-like

patterns at playback.

≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable.

≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the centre of the joy stick.

≥While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [TV ASPECT] in the [SETUP] menu.

Audio dubbing

You can add music or narration to the recorded cassette.

(Audio dubbing can only be performed by using the remote control.)

≥Set to Tape Playback Mode.

1Find a scene that you want to add sound to, and press the [;] button on the remote control.

;

2Press the [AUDIO DUB] button on the remote control to make audio dubbing ready.

A.DUB ;

3Press the [;] button on the remote control to start audio dubbing.

A.DUB ¥

≥Be sure that the sound is directed towards the built-in microphone.

4Press the [;] button on the remote control to stop audio dubbing.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

47

VQT1L48