Panasonic PV-DV101 manual POWER Lamp CHARG About the Flashing of the CHARGE Lamp

POWER Lamp

CHARG_

About the Flashing of the CHARGE Lamp

Connect and plug in the Power Cord

as showr_.

:POWER Lamp will tight.

Remove the DC Cab_e, if attached, from the adaptor.

Attach the Battery as shownto

charge.

•CHARGE Lamp lights up. It goes out when charging is complete {approx, 1 hour), Expect approx. I hour 30 minutes of operation (EVF usage) when fully charged.

Remove the _Battery.

Slide the Battery out and then lift up.

•Charge the Battery within an ambient temperature range of 10 _C and 30 °C.

•If charging is done in extreme low or high temperatures, Battery charge time increases.

CHARGE Lamp flashes when...

:The Battery is being charged, but charging is taking longer than normal.

Charging is not possible. Remove the Battery once, wait a short time, then re-attach it for charging.

Tilt Viewflnder u:>ward.

Insert the Battery Pack and slide it down until it locks with a click.

RELEASE Switch

To remove the Battery Pack:

Slide the Battery upward while sliding the BATTERY RELEASE Switch.