Panasonic PV-DV101 manual I,,i-OllOltllJ im,q IDTLLVLL, Turn off your PC

I',,i-[O]ll[OltllJ" i_m,q IDTLLVL'_L

i

An image recorded on the DV Tape can be transferred to your PC (Personal Computer).

•IBM PC/AT or compatible

•Intel ® Pentium ® Processor

•Microsoft Windows ® 95/98/Me/2000

•RAM: 16 MB or more

•2 MB minimum available hard disk space

•256 color monitor (full color recommended)

•3.5 inch 1.44 MB floppy disk drive (for installation)

•RS-232C serial port (D-Sub 9-pin) An adaptor (D-Sub 9-pin male to a D-Sub female) is required for a D-Sub 25-pin

•Mouse or other pointing device

PC Connector	(D-Sub 9-pin)
	(Default	is COM1.)
2	-PC Connecting
	Cable for	Windows

(supplied)

1 Turn off your PC.

2 Connect the Palmcorder to your PC (Windows) using the RS-232CPC connecting cable (supplied).

•Before connecting the Patmcorder to the PC, make sure the PC power is off to insure that images are transferred properly.

Turn on your PC.

Set the Palmcorder POWER to VCR.

•For extended periods of use, it is recommended to use the AC Adaptor as a power source.

•Refer to PC or Windows manual to identify which COM port is to be used for connection.

46