Use the following features to add interest and professionalism to your recordings or playback. Select from twelve special effects.
3, 4, 5JOGKEY
Button
1 P()WER Switch
Types of Digital Functions
•MIRROR
Symmetrical image from the current camera picture.
•STROBE
The recording appears as a sequence of still frames.
•MOSAIC
The picture appears in a mosaic pattern.
°SLIM
The picture is expanded vertically.
•TRAIL
The subject being recorded creates a trail when in motion.
•STRETCH
The picture is expanded horizontally.
•GAIN UP (Not available during playback) Picture sensitivity is increased.
• Only Manual Focus is available,
•WIPE
Successive scenes are separated in a way which simulates the drawing of a curtain,
*MIX
The current scene is mixed in with the following scene during scene changes.
•PinP
PinP _Still image) is displayed on the Main Picture.
•SEPIA (Only available during playback)
The picture is played back in sepia, a brownish color, gMng it an antique look,
•MONO (Monotone) (Only available during p_ayback)
The picture is played back in
Set POWER to CAMERA or VCR.
°The POWER lamp lights red.
,Be sure POWER is fully turned to
CAMERA or VCR position. Press MENU to display the menu
screen.
Rotate JOG KEY to select
_inthe CAMERA mode menu screen or _in
the VCR mode menu screen, then
press JOG KEY to display the CAMERA FUNCTION or VCR PLAY
FUNCTION menu screen. Rotate JOG KEY to select
_,and then press JOG
KEY repeatedly to select one of the
Digital Functions listed on the left. To cancer the Digital Function, press
JOG KEY repeatedly to select OFF.
•The EIS and Digital Zoom features are turned off automatically when one of the Digital Functions listed at left is selected.
[ To use the WIPE function j
a.ln Camera mode, set the "D.FUNCTtON" item in the main menu screen to "WIPE". (See page 15.)
b, Press REC/PAUSE to start recording. c.Press REC/PAUSE to pause recording.
The last scene will be memorized.
d, Press REC/PAUSE Io start recording again. The new scene will take the place of the memorized scene.
[ To use the MIX function | I |
a.ln Camera mode, set the "D.FUNCTION" item in the main menu screen to "MIX".
(See page 15.) Then, perform steps
The memorized scene and the new
scene will appear mixed as the scene changes from one to the other.
37
