Here are some of the basic indications Monitor. Only DATE/TIME indications
which will appear on the Palmcorder EVF and LCD will be recorded onto the tape.
IVOLU"E8 X'i'I'l --
12:34:5
JAN | 2 2001 | f | L_ |
,,, |
|
| ,.,# |
OBattery Remaining
FULL
E.p_
Tape Remaining
R0:30 RI:00
!i
:.;:od- :.d:od-
r | i | ", | i | i | _, |
•It will take several seconds for the tape remaining indicator to operate after the tape starts moving.
DisplayON/OFF and Counter/Time Code The indication switches as shown
below when the desired "DISPLAY" mode is selected from the menu, (See pages 16, 18.)
*When OFF is selected, all displays are turned off.
LinearTime Counter Memory Counter
t1,
Time Code
Memory Counter M 0:00:00
The Palmcorder will stop whenever it reaches the point where the counter was previously set to M 0:00:00 during audio dub, fast forward, or rewind.
Time Code 0h00m0Os00f
Digital Zoom and other Digital
Lmctions (See page 33.)
This display appears when the digital zoom function has been activated.
Playback Effect (See page 37.)
[his display appears when SEPIA or MONO is selected in VCR menu.
OiTape Speed Indication (See page 15.) Indicates the tape speed (SP or LP).
The Palmcorder calculates and displays exactly where you are on any tape in terms of hours, minutes, seconds, and frames (30 frames = 1 second).
• This display can not be reset.
IMPORTANT NOTE:
°Display must be set to ON for MF, AE, W.BALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel when selected.
•C.RESET does not work when DISPLAY is set to OFF and T.CODE.
19
