•Remove the lens cap and clip it to the hook.
t
Clip here | POWER ZOOM Switch |
AdjustmentSwitch
Centre1 _
POWER
Lamp
3RI_C/PAUSE
Button
WARNING:
•Do not leave the Palmcorder with the EVF aimed directly at the sun as this may cause damage to the internal parts of the EVF,
*Do not lift or carry the Palmcorder by the EMF or the LCD Monitor.
_(_ _.
\\
Before you begin
Connect the Palmcorder to a power source. (See pages 11, 12,)
•Insert a cassette with record lab closed. (See page 6.)
1 Set POWER to CAMERA.
•The POWER Lamp lights red.
•Be sure POWER is fully turned to
CAMERA position. EVF
2 REC/PAUSE mode
With the Viewfinder Eye Cup up to your eye, adjust the Vision Adjustment Control to your eyesight.
(See page 10,)
3 Press REC/PAUSE to start recording.
•"REC" is displayed on the screen. Press REClPAUSE again to pause recording.
•To reduce microphone wind noise, set the
•When the Palmcorder is aimed at excessively bright objects, or bright lights,
a vertical bar may appear in the picture, This is a normal characteristic of the CCD
To conserve power
Iter 5 minutes, the Record/Pause mode ill automatically change to Standby mode. o resume recording, set POWER to OFF
nd then ON again.
You can gradually zoom in tor close ups or zoom out for wide angle shots.
Zoom slowly : by Iightly pressing the "T" (Telephoto) or the "W" (Wide Angle) side of the POWER ZOOM Switch.
Zoom quickly : by app_yirtg more pressure.
•The zooming speed ranges from a slow 22 seconds to a fast 2 seconds according to the amount of pressure applied to the POWER ZOOM Switch.
22
