Intercom

Handset

Base Unit

A 2-way intercom can be set up between the base unit and the handset.

Paging the base unit from the handset

1Handset: Press [MENU].

2Handset:

Scroll to “Intercom” by

pressing [ >] or [> ], then press Select.

3Base unit:

When the other party’s voice is heard after the beeps, answer using the MIC.

The IN USE/CHARGE indicator lights.

4To disconnect the intercom, press [OFF] on the handset.

OR

Press [LOCATOR/ INTERCOM] on the base unit.

The IN USE/CHARGE indicator goes out.

Paging the handset from the base unit (Handset locator)

Using this feature, you can also locate the misplaced handset.

1Base unit:

Press [LOCATOR/ INTERCOM].

The handset beeps for 1 minute and displays “Paging”.

The Ringer and IN USE/ CHARGE indicators flash.

To stop paging, press [LOCATOR/INTERCOM] on the base unit.

2Handset:

Press Intercom to answer.

The handset displays “Intercom”.

3Base unit:

Talk into the MIC.

4To disconnect the intercom, press [OFF] on the handset.

OR

Press [LOCATOR/ INTERCOM] on the base unit.

The IN USE/CHARGE indicator goes out.

If you do not want to answer the page in step 2, press [OFF] to stop paging.

During an intercom call:

If the handset user has difficulty hearing the base unit user, decrease the base

unit speaker volume by pressing VOLUME [ >].

If noise interferes with the conversation, press CH while “CH” is shown on the handset display. The unit selects a clearer channel.

If an incoming call is being received, the intercom call stops and the unit starts to ring. To answer, press [], [] or [SP-PHONE].

38

Page 38
Image 38
Panasonic TG2258PW Intercom, Paging the base unit from the handset, Paging the handset from the base unit Handset locator