Panasonic TG2258PW Making Calls Using the Base Unit Base Unit, Press SP-PHONE

Making Calls

Using the Base Unit Base Unit

1Press [SP-PHONE].

•The SP-PHONE indicator lights.

2Dial a phone number.

3When the other party answers, talk into the MIC (microphone).

4To hang up, press [SP-PHONE].

•The indicator light goes out.

[REDIAL]

[HOLD]

[SP-PHONE]

and Indicator

MIC

VOLUME [ >], [> ]

•To switch to the handset while using the base unit speakerphone:

—If the handset is off the base unit, press [] or [].

—If on the base unit, just lift up.

•During a call using the handset, the call can be switched to the base unit by pressing [SP-PHONE]on the base unit.

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•Talk alternately with the other party in a quiet room.

• If you or the other party has hearing difficulty, press VOLUME [ >] to decrease the speaker volume.

Cordless Telephone

To adjust the speaker volume (8 levels) while talking

To increase volume, press VOLUME [> ].

To decrease volume, press VOLUME [ >].

•If you try to increase/decrease volume when it is at the maximum/ minimum level, the base unit will beep 3 times.

To redial the last number dialed on the base unit

Press [SP-PHONE]then [REDIAL].

To put a call on hold

Press [HOLD].

•The SP-PHONE indicator flashes.

To return to the call, press [SP-PHONE].

•The handset user can return to the call by pressing [] or [], or lifting the handset off the base unit.

•If another phone is connected on the same line, you can also return to the call by lifting its handset.

•If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected.

•The alarm volume corresponds to the ringer volume level (p. 17). If the ringer is OFF, the alarm will sound at the LOW level.

For assistance, please call: 1-800-211-PANA(7262)

25