Panasonic TG2258PW Settings, Connections, Installing the Battery in the Handset

Settings

Connections

Single-Line Telephone Jack (RJ11C)

Fasten the AC adaptor	Telephone Line Cord
cord.	Power Outlet
Hook
	(AC 120 V, 60 Hz)
	AC Adaptor

•USE ONLY WITH Panasonic AC ADAPTOR PQLV19 (Order No. PQLV19Z).

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services.

•The unit will not work during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66.

Installing the Battery in the Handset

Insert the battery ( 1 ), and press it down until it snaps into the compartment ( 2 ). Close the cover.

1

+

+

2

+

To replace the battery:

Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 9). Close the cover and charge the battery for about 6 hours.

Battery Charge

Place the handset on the base unit and charge for about 6 hours before initial use.

•The IN USE/CHARGE indicator lights and the unit beeps once.

•It is normal for the back on the handset to feel warm during battery charge.

OR

IN USE/CHARGE Indicator

8