Panasonic TG2258PW Preparing the Answering System Number of Rings Handset, Recording Mode Handset

Preparing the Answering System

Number of Rings Handset

You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.

1		Follow steps 1 to 3 of “Caller’s Recording
		Time” on page 20.
	2	Press Select at “Number of rings”.
				Number of rings
					Back	>>	Select
	3	Select the number of rings by pressing [	>] or
				Number of rings
		[ ].		:4
		>				>>
		• You can also select the number of rings by			Back		Save
		pressing [0] (Toll saver*), or [2] to [7].

4Press Save, then press [OFF].

*Toll saver

When you call the unit from a remote operation, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages.

Recording Mode Handset

You can select the recording mode, “Enhanced recording (8min)” or “Standard recording (17min)”. If you require clearer sound to listen to the messages, select “Enhanced recording (8min)”. If you select this mode, the total recording time is

8 minutes. If you require longer recording time, select “Standard recording (17min)” (the factory preset).

1Follow steps 1 to 3 of “Caller’s Recording Time” on page 20.

2		Scroll to “Recording mode” by pressing [>]
			Recording mode
		or [>], then press Select.
				Back	>>	Select
3	Select the recording mode by pressing [>] or
			Standard
		[ ].
		>	recording(17min)
				Back	>>	Save

4Press Save, then press [OFF].

Preparation

For assistance, please call: 1-800-211-PANA(7262)

21