Panasonic PT-LB51NT, TH-LB50NT, TH-LB55NT Default settings of USER1 - USER3, Panasonic Projector

Network/Security setting of the projector (cont.)

Additionally perform the following setting using the [AUTHENTICATION] setting.

DETAILED SETUP

		USER1		3/3
		DEFAULT KEY		1
		KEY1		＊＊＊＊＊＊＊＊
		KEY2		＊＊＊＊＊＊＊＊
	RETURN	KEY3		＊＊＊＊＊＊＊＊
SELECT		KEY4		＊＊＊＊＊＊＊＊
		RETURN	OK	CANCEL

When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method: DEFAULT KEY : Set 1 – 4 numerals for the default key.

KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].

Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the hexadecimal format).

When using [WPA-PSK※] or [WPA2-PSK※] : Set key and select [OK].

Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

※“Glossary” (See page 65)

Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE].

※“Glossary” (See page 65)

Default settings of [USER1] - [USER3]

The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the factory.

SSID	: Panasonic Projector
DHCP	: OFF
IP ADDRESS	: 192.168.11.100
SUBNETMASK	: 255.255.255.0
DEFAULT GATEWAY : 192.168.11.1
MODE	: AD HOC
AUTHENTICATION	: OPEN
ENCRYPTION	: NONE
CHANNEL	: 11

50