Panasonic TH-LB50NT Verifying settings, Returning to the initial settings, Select OK with the

Network/Security setting of the projector (cont.)

Verifying settings

Your current settings appear.

Select [STATUS] at the network menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

WIRED LAN
WIRELESS LAN
	S-MAP
NAME CHANGE
PASSWORD	OFF
PASSWORD CHANGE
NETWORK STANDBY	OFF
NETWORK CONTROL	ON
LIVE MODE CUT IN	OFF
COMPUTER SEARCH
MULTI-LIVE

SELECT

RETURN

ENTER

STATUS

INITIALIZE

The status of the following will appear.

WIRED LAN

DHCP	“ON” - “OFF”
IP ADDRESS	(See page 47)
SUBNETMASK	(See page 47)
DEFAULT GATEWAY	(See page 47)
MAC ADDRESS

WIRELESS LAN

ANTENNA LEVEL	(The strength of the connection will appear.)
NETWORK	“S-MAP”, “1” - “4”, “USER1” - “USER3”
MODE	“AD-HOC” - “INFRASTRUCTURE”
CHANNEL	Refer to page 5 for usable channels.
SSID	(See page 49)
AUTHENTICATION	“OPEN” - “SHARED” - “WPA-PSK” - “WPA2-PSK”
DEFAULT KEY	“-” - “1” - “4”
ENCRYPTION	“NONE” - “WEP” - “TKIP” - “AES”
DHCP	“ON” - “OFF”
IP ADDRESS	(See page 48, 50)
SUBNETMASK	(See page 48, 50)
DEFAULT GATEWAY	(See page 48, 50)
MAC ADDRESS

Returning to the initial settings

You can reset the network setting to the factory default of the projector.

1 Select [INITIALIZE] at the network menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

WIRED LAN
WIRELESS LAN
	S-MAP
NAME CHANGE
PASSWORD	OFF
PASSWORD CHANGE
NETWORK STANDBY	OFF
NETWORK CONTROL	ON
LIVE MODE CUT IN	OFF
COMPUTER SEARCH
MULTI-LIVE

SELECT

RETURN

ENTER

STATUS

INITIALIZE

The entry of the password is prompted if [Password setting] is turned [ON] in the [ Security] menu.

2	Select [OK] with the [	] buttons and press the [ENTER]
	button.

INITIALIZE

INITIALIZE

OK CANCEL

RETURN

SELECT

ENTER

54