Self-Timer

Mode Dial

1

Press the

button.

 

z Press the

button several times until

 

appears on the display panel. If the

 

LCD Monitor is on, press the

button

 

until the

icon or

icon appears in

 

the monitor.

 

 

 

zYou can cancel the self-timer by pressing

the button again.

zWhen the self-timer is set to ( ), the shutter activates 10 (2) seconds after the shutter button is pressed fully.

zWhen is selected, the self-timer sounds and the self-timer lamp starts blinking when the shutter button is pressed all the way. The blinking gets faster two seconds before the shutter activates.

zWhen is selected, the self-timer lamp blinks fast from the beginning. The shutter activates in two seconds.

zYou can change the self-timer sound by changing the setting in [Selftimer Sound] in the [ (My Camera)] menu (p. 53).

Setting the Number of Seconds until Shooting

You can set the number of seconds from the time the shutter button is pressed to the time the image is shot to 10 seconds or 2 seconds.

1 Select [Self-timer] from the [ (Rec.)] menu.

zSee Selecting Menus and Settings (p. 46).

2

Select [ ] (10 seconds) or [ ]

(2 seconds) and press the MENU

button.

76

Page 79
Image 79
Canon CEL-SE65A210 manual Self-Timer, Setting the Number of Seconds until Shooting, Select Self-timer from the Rec. menu