Canon CEL-SE65A210 Editing Movies, Select the movie you wish to edit and press the SET button

Editing Movies

You can delete unwanted portions from the first or second half of a movie clip.

1 Select the movie you wish to edit and press the SET button.

zSee Viewing Movies (p. 128).

2 Select (Edit) using the W or

Xarrow on the omni selector and press the SET button.

zThe movie editing panel and the movie editing bar appear.

3 Select an editing method using the S or T arrow on the omni selector.

(Cut beginning) : Deletes frames in the first half of the movie

(Cut end)	: Deletes frames in the
	second half of the
	movie
(Exit)	: Reverts to the movie
	playback panel

Movie Movie

Editing Editing

Panel Bar

4 Select the range you wish to delete using the W or X arrow on the omni selector.

Editing position

5 Select (Play) using the S or T arrow on the omni selector and press the SET button.

zThe temporarily edited movie will start playing.

zThe movie will stop if you press the SET button while it is playing.

130