zThe nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. Nevertheless, a certain amount of processing time may be required before the next image can be shot.

zSee page 206 for settings that can be changed in this mode.

zPlease note that camera shake becomes a factor at slow shutter

speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting.

zThe fastest shutter speed that can be used effectively with the flash is 1/250 second. If you try to select a speed faster than 1/250 second, the camera automatically resets the shutter speed to 1/250 second.

zThe aperture value and shutter speed change according to the zoom state as follows.

 

Aperture Value

Shutter Speed (seconds)

Wide Angle

F2.0 – 3.5

to 1/1250

F4.0 – 8.0

to 1/2000

 

Telephoto

F3.0 – 5.0

to 1/1250

F5.6 – 8.0

to 1/2000

 

Shooting – Selecting Particular Effects

83

Page 86
Image 86
Canon CEL-SE65A210 manual Aperture Value Shutter Speed seconds Wide Angle