Selecting Images for Transferring (continued)

3 Select images for transferring.

Single Images

zSelect an image using the main dial or the W or X arrow on the omni selector and mark or remove marks from images using the S or T arrow on the omni selector. A check mark appears on the marked image.

zYou can use the same procedures to select images in index playback

(3 images). Press the button to switch between single image playback and index playback.

All the Images on a CF Card

zPress the button to switch to index playback (3 images).

zThen press the SET button, and select [Mark all] using the S or T arrow on the omni selector and press the SET button again. (If you select [Clear all] instead of [Mark all], you can remove marks from all the images.)

zYou can select images using the main dial or the W or X arrow on the omni selector and change the settings using the S or T arrow on the omni selector after [Mark all] or [Clear all] has been selected.

4 Press the MENU button.

z The selection mode will turn off and the Transfer Order menu will reappear.

z Images are transferred in order from oldest to newest by the shooting date.

zA maximum of 998 images can be marked per CF card.

150

Page 153
Image 153
Canon CEL-SE65A210 manual Select images for transferring, 150, Selecting Images for Transferring