You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to a computer.

zThe camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the Troubleshooting section of the Canon Digital Camera Software Starter Guide Disk.

z You do not need to turn off the camera or computer power when making a USB connection.

zPlease refer to your computer’s manual for information regarding the location of the USB port.

zYou are recommended to use a fully charged battery pack or Compact Power Adapter CA-560 (sold separately) to power the camera when connecting to a computer (p. 18, 189).

zAll procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.

1Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk.

zPlease see the Canon Digital Camera Software Starter Guide Disk for the installation procedures.

With a Macintosh, it is next necessary to set the ImageBrowser on automatic start. For further details, please see the Canon Digital Camera Software Starter Guide Disk.

Connecting

153

Page 156
Image 156
Canon CEL-SE65A210 manual 153