Canon CEL-SE65A210 Attach the conversion lens, Adapter to the camera by aligning, Adapter 58C

2	Attach the conversion lens
	adapter to the camera by aligning
	the part of the adapter marked (A)
	with the ring release button, then
	rotating it until the	mark.
	z If you wish to mount the Macro Twin
	Lite MT-24EX on the camera, it is
	recommended that you first attach the
	Macro Lite Adapter 58C (sold
	separately).
	z If you wish to use the Close-up Lens
	250D (p. 186) together with the Macro
	Ring Lite MR-14EX or Macro Twin Lite
	MT-24EX,the Close-up Lens 250D
	should be attached first followed by the
	Macro Lite Adapter 58C (sold
	separately).

3	Attach the controller to the
	camera’s hot shoe.

4	Macro Ring Lite MR-14EX
	Press and hold the release
	buttons on both sides of Macro
	Ring Lite MR-14EX and fit it into
	the conversion lens adapter.
Release buttons
Release	Macro Twin Lite MT-24EX
buttons	Press and hold the release button
	on the top of the external ring
	and fit it into the conversion
	lens adapter or Macro Lite
	Adapter 58C.

Appendix

183