Canon CEL-SE65A210 manual Press the shutter button, 113

3 Press the T arrow on the omni selector, then select the number of shots using the W or X arrow on the omni selector.

zIf you press the W or X arrow on the omni selector continuously, the number of shots increases in units of 5 shots at a time.

zThe maximum number of shots* is determined according to the CF card’s remaining capacity.

*In some cases, the actual maximum number of shots may be fewer than the displayed number.

4 Press the SET button

z appears on the LCD monitor and appears on the display panel.

5 Press the shutter button.

zThe first image is shot and the interval shooting session starts.

zOnce the set number of shots is taken, the camera automatically powers down regardless of the power saving function settings.

zIf the below operations are accessed while the interval shooting is in process, the interval shooting session will be canceled.

•Turning the mode dial or pressing the shutter button halfway while the camera is waiting to shoot the next image

•Opening the CF card slot cover or battery cover

•Switching to Playback mode

•Turning off the power

zOnce the interval shooting session is started, all operation buttons become inactive.

zThe lens stays extended until the next image is shot.

zImages are not displayed on the LCD monitor right after being shot.

zInterval shooting is not available when the date and time are not set.

zContinuous Shooting, AEB mode and Focus-BKT mode are

not available. The self-timer can only be used for the first shot in the series.

Shooting – Selecting Particular Effects

113