Canon CEL-SE65A210 manual Cable to the video in and audio, Jacks on the TV, 160

Attach AV Cable AVC-DC300 to the A/V OUT terminal on the camera.

Viewing Images on a TV Set

A video-compatible television connected via the supplied AV Cable AVC-DC300 can be used to view images as you shoot or replay them.

1 Turn off the camera and the TV (p. 31).

2

3			Plug the other ends of the AV
	Yellow	To the Video
	Plug	In Jack	cable to the video in and audio in
			jacks on the TV.
	Black	To the Audio
	Plug	In Jack

4 Turn on the TV and switch it to Video mode. 5 Turn the mode lever to or (p. 30).

zThe image will appear on the TV. Shoot or play back images as usual.

z No image will appear on the LCD monitor when the camera is connected to a TV monitor.

zThe video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 52). The default setting will vary between regions.

NTSC: Japan, U.S.A., Canada, Taiwan, etc.

PAL: Europe, Asia (excluding Taiwan), Oceania, etc.

If an incorrect video system is set, the output image will not display properly.

zIf the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV’s manual for details.

zA TV set cannot be used in mode.

160