Selecting an AF Frame

The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following way.

zSelecting AiAF (auto selection) or a center-point AF frame (see below).

zSelecting a desired position for the AF frame (p. 90).

Mode Dial

You can set the AF mode selection to Auto Selection (AiAF) or to center-point. When Auto Selection (AiAF) is selected, the camera automatically selects an AF frame from 9 points to focus according to the shooting conditions. With the digital zoom, the center-point AF-frame is always selected.

1 Press the button.

zThe AF mode selection will appear in the Display Panel. If the LCD Monitor is on, the AF frame will be displayed in green.

2 Select the auto selection or center-point AF frame using the main dial.

zYou can select either AiAF (auto selection) or center-point AF

using WX when the camera is in , , , or modes.

Shooting – Selecting Particular Effects

 

e.g. Auto Selection

e.g. Center-point

 

 

 

 

 

 

3

Press the

button.

 

 

z You can immediately shoot the image using the selected AF frame

 

by pressing the shutter button instead of pressing the

button.

89

Page 92
Image 92
Canon CEL-SE65A210 manual Selecting an AF Frame, Press the button