Canon CEL-SE65A210 manual Confirming information on the LCD Monitor

Confirming information on the LCD Monitor

Information Displayed on the LCD Monitor

The LCD monitor displays information in Shooting or Playback mode, such as the camera settings, remaining image capacity and shooting date/time.

zShooting Mode

Settings which have been altered will be displayed on the LCD monitor for approximately six seconds, even if the information display has been turned off. (Sometimes no information appears depending on the camera setting at that time.)

zA slow shutter speed has likely been selected because of insufficient lighting if the camera shake icon appears on the LCD monitor after metering preparations are complete. Set the flash to (On) or (Auto), or affix the camera to a tripod to shoot.

z After you take a photo by fully pressing the shutter button, the image displays on the LCD monitor for approximately two seconds (or the review duration you set from 2 to 10 seconds).

If you press the SET button or button while the image is displayed, it will continue to display (p. 57).

zYou can check the brightness of the image during the image review after shooting using the histogram (p. 40), a graph which allows you to judge the brightness of the recorded image and other information appearing with the image. You can adjust the exposure according to the results, then shoot again if necessary. (If no histogram appears, press the DISPLAY button.)

36