Canon CEL-SE65A210 manual Error Codes, Message Codes, 167

List of Error/Message Codes

The following error and message codes may appear on the display panel.

Error Codes

	: The camera has experienced a problem. Turn off the
(XX: number)	power, wait a second, and then try shooting or playing
	back. If the error code appears repeatedly, there is a
	problem. Note the error code number and take the camera
	in for servicing. If an error code appears immediately after
	a shot, there is a chance that the image was not recorded.
	Check the image in playback mode.

Message Codes

: Playing back image.

: Connected to computer in PC connection mode.

: Adequate battery charge.

: Low battery charge. Charge the battery as soon as possible to use for any length of time.

: Battery charge low, camera will not operate. Immediately recharge or replace the battery pack with a charged one.

: No CF card in camera, CF card/battery cover is open, or CF card error.

: Power turned on while holding the lens. Turn power off and on again.

: Intervalometer is set (shoots images automatically at set time intervals). (The number of remaining shots display after the first images is shot.)

List of Messages

167