Switching between Flash Adjustment Settings

Mode Dial

The built-in flash and the externally mounted flash* fire with automatic flash adjustments (except in the M mode), but it is possible to set them so that they fire without any adjustments.

*Speedlite 220EX/420EX/550EX/580EX, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX

1

Select [Flash Adjust] from the [

 

 

(Rec.)] menu.

 

z See Selecting Menus and Settings (p. 46).

 

2

Select [Auto] or [Manual] and press the MENU

button.

 

Compensating the Flash Adjustment/Flash Output

Mode Dial

 

zWhen [Flash Adjust] is set to [Auto], settings can be

 

adjusted in 1/3-stop increments in the range of –2 stops

Flash Adjust

to +2 stops.

zYou can combine flash exposure compensation with the

 

 

camera’s exposure compensation function for ambient

 

light to achieve creative effects.

 

zIn M mode or when [Flash Adjust] is set to [Manual], the

 

flash output can be controlled in three steps, starting

 

from FULL, when shooting. This setting is also effective

Flash Output

for slave flash photography where multiple flashes are

fired at the subject from different positions because the

 

 

pre-flash does not fire. When an externally mounted

 

flash is attached, its flash output can be controlled (Up to

 

1/16 from Full, in 1/3 steps).

Shooting – Selecting Particular Effects

109

Page 111 Page 113
Page 112
Image 112
Canon CEL-SE65A210 manual Switching between Flash Adjustment Settings, Compensating the Flash Adjustment/Flash Output, 109
Page 111 Page 113
Top Page Image Contents