Canon CEL-SE65A210 manual Replacing the Date Battery, 191

Replacing the Date Battery

If the Set Date/Time menu appears when you turn on the camera power, the date battery charge is low and the date and time settings have been lost. Please replace the battery with a generic CR2016 lithium coin battery with the following procedures.

Please note that the first date battery may appear to expire relatively quickly after you purchase the camera. This is because it is installed in the camera at the point of manufacture, not when you make the purchase.

zBe particularly careful to keep the date batteries out of the reach

of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.

2 3 4 Negative Terminal (–)

Battery holder

1 Turn off the power and open the battery cover (p. 21).

2 Remove the battery pack, then pull out the battery holder by hooking your fingertip under the bottom of the battery holder edge.

3 Use your fingertip to push the edge of the battery in the direction of the arrow.

Appendix

191