Fixing the display unit to the wall

1

Lift the display so that the upper insulating spacers at the back may fit

into the notched indentation at the top of the holding bracket, and then

 

lower the display into place.

2

1)

Lift the display slightly and insert the lower insulating spacers at the

 

back of the display unit into the lower cutouts in the holding bracket.

 

2)

Lower the display into the lower notched part of the cutouts.

3 Insert and fasten the screws at both the left and right sides.

Holding bracket

Fixing screws (left and right)

Do not lift the display too high or it may come out of the notches in the upper indentations.

To prevent the display unit from becoming d e t a c h e d f r o m t h e holding bracket, make sure that both the left and right fixing screws are properly fitted.

Fixing screw(M5)

2-7

Page 21
Image 21
Panasonic TY-ST42PW1, TY-WK42PV1, TY-WK42PR1 Holding bracket Fixing screws left and right, Lower the display into place