Prepare the display.

1 Install the insulating spacers in the display unit.

Lay the display with the screen facing down on a clean blanket or sheet and follow the steps below.

1)Remove the four bolts from the display.

2)In each of the four bolt holes, insert a pan head bolt with hex socket (M8-45), toothed pan washer and insulating spacer (four each, all included). Insert as shown in the diagram on the left.

Quite los cuatro pernos.

Pan head bolt with hex socket

Toothed pan washer Insulating spacer

6-6

Page 49
Image 49
Panasonic TY-ST42PT3K Prepare the display, Quite los cuatro pernos, Install the insulating spacers in the display unit