| Mount the display in the ceiling unit. |
|
|
1 | Hook the display’s top insulating spacers in the ceiling unit by aligning |
the display with the notches in the ceiling unit and sliding the display | |
| downward. |
2 | Insert the bottom insulating spacers by lifting the display slightly, fitting |
the bottom spacers into the holes, and then lowering the display. |
Insulating spacer
Notch
Notch
Do not lift the display too high. It may come unhooked from the unit.
3 Fix the display.
Install two fixing screws (M5, included) in the corresponding holes on the ceiling unit (left and right).
Fixing screw (M5) 1 each
left and right sides
When mounting the display in the ceiling unit, be sure the ceiling unit is straight and not at an angle.
Fixing screw (M5) x 2
Install the fixing screws on the left and right to prevent the display from sliding out of the ceiling unit.
