Panasonic TY-SP42PM3W, TY-WK42PV1 manual Ceiling unit, Speakers, Points to note during installation

Ceiling unit

Ceiling unit Insulating spacer x 4 Fixing bolt (M8-12) x 2

Allen key Fixing screw (M5) x 2

	Fixing bolt (M8-100)	Fixing bolt (M8-20) x 2
Pan head bolt with hex socket	Spring washer	Cable tie x 2
(M8-45) x 4
Toothed pan washer x 4	Washer pan nut (M8)

Speakers

Speaker x 2	Mounting bracket	Bracket mounting	Speaker cable
	(right) x 2	Assembly screw (M4-10) x 12	(20 cm) x 2
	Mounting bracket	Sponge x 2
	(left) x 2

Points to note during installation

•This ceiling unit is for mounting a Wide Plasma Display to a ceiling for viewing pur poses. Do not use it for any type of installation other than ceiling mounting.

•In order to ensure correct, problem-free operation of the Wide Plasma Display, do not install the Display in any of the following places:

•Next to sprinklers or sensors

•Where it may be subject to vibration or shocks

•Near high-voltage wires or electric motors

•Where it may be in direct contact with air from heaters

•When installing this ceiling unit, use a fixing method appropriate to the type of ceiling.

•Insert the mains plug for the Wide Plasma Display into a mains socket which is close and easily accessible.

•Provide adequate ventilation so that the temperature around the display does not rise above 40° C (104 F° ).

If there is insufficient movement of the air inside the display, heat may build up inside the display and fire may result.

•For U.S.A (TH-42PW3 / TH-42PWD3 only)

If the connection cable cannot reach the Display when it has been installed to the wall, use the 15 m cable (TY- SCP15C03) which is sold separately.