Panasonic TY-SP42PM3W, TY-WK42PV1, TY-WK42PR1, TY-ST42PT3S Fixing the display unit to the stand

Fixing the display unit to the stand

1	1)	Spread a clean cloth over a level floor or base, and place on it the
		display unit face down.
	2)	Remove the screws and covers.
		Keep them in a safe place for possible future use.

2	Insert the two poles at the top of the stand into the holes in the base of
	the display unit as shown in the illustration below.
3	Insert the four screws, two on each side, into the holes in the back of
	the display unit and fasten them into the holes in the inserted poles.

3-4

Lock the casters before installing the display unit. Press down the caster switch to lock the caster.

Unlock

Lock

Assembly screw (M5-30)