Insert and fasten a M6 screw bolt into the center-top hole.
2
3 Use a level gauge to correct the alignment of the
4 Provisionally tighten the fixing screws.
| Fixing the insulating spacers to the display |
| unit |
1 | Spread a clean cloth over a level floor or base, and place on it the display |
unit face down. | |
| Remove the four screws from the display. |
2 | Use the accessory tool "Allen key" to install the four accessory , |
and into the holes. |
If required, use commer- c i a l l y ava i l a bl e M 6 bolts which suit the wall materials.
If the Screws protrude more than 5 mm, it will not be possible to install the Wide Plasma Display in the correct position.
Place the display unit face down on top of a cloth clean and free from otherforegin particles, and then proceed to the next step.
Pan head bolt with hex socket
Toothed pan washer
Insulating spacer
