PREFACE
The Data Multiplex Unit
The unit multiplexes video signals with control data and VD2 sync into a coaxial cable. This makes installations between the unit and cameras easy.
The monitor and system controller can be located distant from the camera site thanks to the use of a coaxial cable and an
The unit includes two protocols, Panasonic Security Data (PS • Data) and the Camera Communication one, selectable with DIP switches.
FEATURES
Front Panel Operations
•Camera channel selection from 1 to 4
•Alarm reset/suspension
•
In/Out Features
•Four camera inputs with multiplexed control and VD2
•Four camera outputs looped through
•Spot (monitor) in/out
•VS/VD (sync) in/out
•
•
•Alarm in/out and remote in/out, switchable
Displayed Image on the monitor screen
•Camera channel selected
•Alarm channel activated
•Setup menus
Camera control with WV-CU360C
•Pan/tilt head and housing control
•Motorized lens control (focus, zoom, iris, etc.)
•Camera setup menus
Alarm Function
•Inputs: Video Motion Detection by the camera/Alarm input to the terminal.
•Output: Signal is supplied to respective alarm terminal.
•Preset: The camera moves to the preset position when an alarm operates.
•Display: The activated channel picture and the channel number are displayed.
5
