●Alarm Reset
Alarms are reset according to the reset mode (EXT, auto
•Manual resetting
Pressing the RESET button on the unit resets the activated alarm.
Pressing the ALARM RESET button on the controller resets the activated alarm.
•External resetting
Input to the ALARM/REMOTE terminal resets the activated alarm when the terminal is set to the alarm input mode.
•Auto resetting
Elapsing of the preset time resets the activated alarm, except for the unit's alarm indicator which remains on steady light.
●Alarm Suspension
This function is used in the setup operation or whenever you do not wish to accept alarm inputs.
Press the ALARM SUSPEND button on the front panel, or ALM SUSPEND on the controller. Alarm inputs will be ignored while the indicator is lit.
Press the button again to release the alarm suspension. Alarm inputs will be accepted after the indicator turns off.
Function |
|
|
|
|
|
|
|
|
| Enter a camera number with | |
|
|
|
| numeric buttons. | |
Camera Selection |
|
|
| CAM | CAM |
2 | 3 | 4 |
| ||
1 | # | then | |||
|
|
|
| ||
|
|
|
|
| SET |
ALM RESET
Alarm Reset | ALARM |
RESET |
ALM RECALL
ALARM |
| ALM SUSPEND |
|
Alarm Suspend | SUSPEND |
| SET |
Alarm Suspend | ALARM | ALM SUSPEND |
| SUSPEND | |
Reset |
| |
| SET | |
|
|
29
