VOICE COMMANDER

“VOICE COMMANDER SETTINGS” MAIN FUNCTIONS

“Voice Commander Settings” helps you to personalize the system.

There are five major functions. They are “Contacts”, “Application”, “Music” and “Advanced Settings”.

“Voice Commander Settings”, there is ways to start it:

Start > All Programs > More > Applications > More > Voice Commader > Menu > Settings

1. “Contacts” Setting Page

After launching the “Voice Commander Settings”, press Menu

>Contacts. This page will list all names in the device’s contact database and SIM card. When a new contact is created, the system will automatically update the recognition database.

A check box will be shown in front of each name

You can use "Voice Commander" to look up unread E-mails.

When a box is checked, means the contact can be recognized normally.

When a box is unchecked, means the contact is not in the recognition range.

When a box is grayed and can't be checked, means the name contains some unrecognizable characters, such as symbols or marks. You can build a voice tag to enable it.

The default recognition database is limited to 2,000 contacts. You can check the leading check boxes of the contacts exceeding 2,000 items to enable additional entries.

`NOTE

You can rebuild the voice tag by tapping the “Rebuild” button again. You can delete the voice tag by tapping the “Delete” button.

2. “Application” Setting Page

After running “Voice Commander Settings”, press Menu > Application. The setting page will list all the applications installed in the “Start” menu. When a new application installed, the system will automatically update the recognition database

Chapter 13. Applications

188

Page 190
Image 190
Pantech Matrix Pro manual Voice Commander Settings Main Functions, Contacts Setting, Application Setting