Pantech Matrix Pro manual SAR Information, Safety Information for Battery Usage

SAR INFORMATION

with the FCC and can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on PP4TX-215.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow-com.com.

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

SAFETY INFORMATION FOR BATTERY USAGE

•Do not disassemble or open crush, bend or deform, puncture or shred.

•Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

•Only use the battery for the system for which it is specified.

•Only use the battery with a charging system that has been qualified with the system per this standard. Use of an unqualified battery

or charger may present a risk of fire, explosion, leakage, or other hazard.

•Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.

•Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.

•Promptly dispose of used batteries in accordance with local regulations.

•Battery usage by children should be supervised.

•Avoid dropping the phone or battery. If the phone or battery has been dropped, specifically on the hard surface, and its damage suspects, take it to the Customer Care Center for correct inspections.

•Improper battery use may result in a fire, explosion or other hazard.

Chapter 16. Safety and warranty

245