Pantech Matrix Pro manual Video Share, Only for the initiator

VIDEO SHARE

8After the session established, recording started with displaying pop up message about the memory available for the recording.

9If you want to disconnect video sharing, press the End key or Select the STOP menu item.

!NOTE

1.The Video Share Call will be terminated in the following cases:

•When adding a 3rd party or Conference Call or a 2nd incoming call is accepted during a Video Share call.

•When the voice call is placed on hold.

•When the voice call is disconnected.

•When moving out of a AT&T 3G service area.

•When the network connection is poor.

2.The Video Share Call will be unavailable in the following cases (“Video Share Ready” message will be greyed out).

•When trying to make a conference call/second call during a call.

•When the voice call is placed on hold.

•When moving out of a AT&T 3G service area.

During a Video Share session, the following features are available for the session.

You can come back quickly to the Video Share session from anywhere by pressing the camera key.

•Hands-free On / Off: You can turn on / off the hands-free feature when the bluetooth device is connected

•Speakerphone On / Off: You can turn on / off speakerphone

•Mute / Unmute: You can turn on / off the mute state

•Stop Video share: Stop current Video Share session.

Only for the initiator

•

•

•

•

Set Brightness: You can adjust the brightness by moving left / right navi key.

Set Volume: You can adjust the volume by moving up / down navi key.

Set Zoom: You can adjust the volume by moving up / down volume key.

Record Video / Stop Record: You can record the video or stop current recording.

Chapter 2. Basic operation

35