BATTERY USAGE

The battery is not charged when the phone is first purchased – fully charge the battery before first use. The battery will charge faster if the phone is powered off while charging. Battery operating time gradually decreases over time. If the battery fails to perform normally, you may need to replace it.

BATTERY INSTALLATION

Be sure to use only the batteries that have been provided with the phone. Installation is easier if you have placed the phone on a flat surface.

1Place the battery on the back of the handset and slide into place.

2Push the battery down until it locks

into place.

 

1

2

 

BATTERY REMOVAL

Again, place the battery on a flat surface and use an even, steady pressure when removing the battery.

1Pull the release latch upwards, lift up the battery.

2Remove the battery from the handset.

`NOTE

If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may detach during use.

Chapter 1. Before using your phone

24

Page 26
Image 26
Pantech Matrix Pro manual Battery Usage, Battery Installation, Battery Removal