2. Installation
Using Only AC Power Source
Procedure
To supply power to the 8620 chassis using a single AC power source:
1. Plug the AC power cord into the IEC 320 receptacle labeled AC INPUT ( ).
GranDSLAM 8620
TX RX
IP | MVL | 8314 |
IP | MVL | 8314 |
MCP |
| 8000 |
10/100BT | 8025 | |
|
| SIM |
INPUT |
AC
2. Plug the other end of the AC power cord into your AC power outlet.
NOTE:
The AC power source should be a nonswitched outlet to prevent accidentally turning off power.
3. Make sure the PWR A LED on the front panel is ON (green).
| July 2003 |