![Cabling](/images/new-backgrounds/117463/11746369x1.webp)
Cabling
3
Making Cable Connections
This section provides the instructions you need to make the necessary cable connections to:
νNetwork (Tip and Ring connections)
νTerminal or Personal Computer (PC)
νModem for remote management
νSNMP management system Terminal, laptop computer, or modem
νAlarm Relay Interface
For any other type of connection, refer to the appropriate DSL card Installation
Instructions.
NOTE:
The Clock A and Clock B connections are for future use. The SERIAL SCM connector is used for the SCP card’s command line interface.
Clock A Clock B
ALARM | A CLOCK B | SCM SERIAL MCP | SCM LAN | MCP |
Serial SCM |
July 2003 |