Paradyne Hotwire 8620 GranDSLAM Installation Guide manual Troubleshooting Table

Troubleshooting

4

Troubleshooting Table

Table 4-1. Troubleshooting Table (1 of 2)

Symptom	Possible Cause	Solutions
Difficulty seating	Other cards and filler plates	Check to see that the other cards and
MCP, SCM or	in the chassis are not	filler plates in the chassis are properly
DSL Card when	properly secured.	secured by the screws on the
installing		faceplate. If you still experience
		difficulty in seating the card, call
		service.
	Card may be slightly	Manipulate the card until it mates with
	warped.	the connector.
DSL Card is not	Bad DSL card.	Replace the DSL card.
working properly
	Problem with connections in	Remove the DSL card from the slot
	this slot.	and reinstall the card into another slot.
	Traffic not flowing.	Check the troubleshooting information
		in the Hotwire Shelf Concentration
		Module (SCM) Card User’s Guide.

8620-A2-GN20-40 July 2003 4-1