ACR-MOTIONMAX Installation Guide
32
SpindleActualSpeedMult=1 Specifies a Ratio of the Analog Spindle speed feed
back to the On screen Display
1
[ToolChanger]
ChangerInstalled=0 Specifies that Machine is Equipped with a
ToolChanger
0
NumberOfToolPockets=24 Specifies T otal Number of Pockets in Magazine 24
BiDirectionaMagazine=0 Set to 1 if Magazine is Bidirectional …. Used for
Shortest Path to Tool Lookup
0
VirtualPockets=0 Set to 1 Virtual T ool Pocket Lookup Stategy is
Desired
0
CheckCurrentPocket=1 tells the DLL to check a tool change to see if its
already in that tool so that it ignores the tool change
instruction.see if its already in that tool so that it
ignores the tool change instruction. Setting this to
=0 tells the system to always execute a tool change
even if it is already at that tool number.(Special
Feature for Customer)
1
[HomeOffsets]
0AxisHomeOffset=0.0 Not Used at this Time
1AxisHomeOffset=0.0
2AxisHomeOffset=0.0
3AxisHomeOffset=0.0
4AxisHomeOffset=0.0
SpindleOrientOffset=0
[SoftLimits]
0PlusSoftLimit=36 Not Used at this Time
0MinusSoftLimit=-.5
1PlusSoftLimit=24.5
1MinusSoftLimit=-.5
2PlusSoftLimit=12.5
2MinusSoftLimit=-.5
3PlusSoftLimit=3600
3MinusSoftLimit=-3600
4PlusSoftLimit=125.5
4MinusSoftLimit=-125.5
[Speeds]
0AxisMaxFeedrate=300 Not Used at this Time
1AxisMaxFeedrate=300 Not Used at this Time
2AxisMaxFeedrate=300 Not Used at this Time
3AxisMaxFeedrate=400 Not Used at this Time
4AxisMaxFeedrate=1000 Not Used at this Time
Acceleration=10 Sets Machine Acceleration & Deceleration 10
Deceleration=10 Not Used at this Time 10
Velocity=400 Sets Machine Max Speed in inches per min. 400