Manuals / Patton electronic / Computer Equipment / Network Router

Patton electronic 2635, 2621 manual Remote Access

Models: 2635 2621

1 133

Download 133 pages 40.62 Kb

Page 99

Remote Access

Models 2603, 2621, and 2635 Getting Started Guide	10 • System Configuration

remain. Only by clicking on the Reset button can you clear the alarm and reset the Time and Count parame- ters. The parameter deﬁnitions are:

•Alarm Severity: there are ﬁve categories of severity-Critical, Major, Minor, Informational, and Ignore.

•Time: the time that the last alarm occurred.

•Count: the number of instances the alarm has occurred.

To conﬁgure the severity of each alarm and to conﬁgure the Alarm Error Log, click on Modify Alarms... to reach the webpage. (See ﬁgure 71.)

Figure 71. Alarm & Alarm Error Log conﬁguration

The Alarm Error Log can be enabled or disabled. The severity level of the Alarm Log can also be conﬁgured.

Similarly each alarm can be set for its own severity level.

Remote Access

The IPLink can be accessed via Telnet, known as Remote Access. The length of access over a remote connec- tion is set on this webpage. If set for zero (0), no user can access the IPLink remotely. However if a user is authorized for access, then the time is the limit before the remote access session is closed.

Figure 72. Remote Access (Telnet) access limit

Remote Access

99

Image 99

Patton electronic 2635, 2621 manual Remote Access

Contents

Sales Ofﬁce +1 301 Models 2603, 2621, andIPLink Series High Speed Routers Getting Started Guide7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Tel +1 301 WAN Services Summary Table of ContentsInitial Configuration Serial Port ConfigurationInitial Configuration ContentsSummary Table of Contents ContentsModels 2603, 2621, and 2635 Getting Started Guide ContentsSerial Port Configuration WAN ServicesContents DHCP and DNS ConfigurationIP Services System ConfigurationContacting Patton for assistance SNTP Client ConfigurationSpecifications System StatusIPLink Physical Connectors Command Line Interface CLI OperationCable Recommendations Models 2603, 2621, and 2635 Getting Started Guide ContentsList of Figures New Policy link to configuration webpage List of Tables About this guide AudienceStructure Safety when working with electricity PrecautionsGeneral observations Factory default parametersGeneral conventions Typographical conventions used in this documentChapter contents ChapterGeneral Information General attributes IPLink Series High Speed Routers overviewWAN Interfaces EthernetProtocol support PPP SupportFront Panel Status LEDs and Console Port SecuritySync Serial Rear panel connectors and switchesConsole port T1/E1Ethernet port outlined in green Power connectorAC universal power supply 48 VDC power supplyIPLink Series High Speed Routers overview 1 General InformationApplications Overview Chapter 2 Product OverviewChapter contents IntroductionIntroduction Figure 2. Sync Serial Application Figure 3. T1/E1 Application Applications OverviewChapter contents Chapter 3 Initial ConﬁgurationHardware installation Interface cable installationWhat you will need TX TX Ethernet connectorWAN connector RX RXHardware installation 3 Initial ConfigurationEthernet connector RJ-45 WAN connector RJ-48CEthernet In this example, the DCE/DTE strap is X.21 connectorFigure 8. Case being opened with a screwdriver Figure 9. Location of DTE/DCE boardV.35 Interface Installing the AC power cord 5. Verify that the green Power LED is lit see ﬁgure Do the following Installing the Ethernet cable5. Type superuser for Login, and press Enter 6. Then type superuser for the password, press EnterWeb Browser IP address modiﬁcationWeb Operation and Conﬁguration PC ConﬁgurationFigure 14. Model 2603 home page Figure 15. Model 2621 home page 3 Initial Configuration Hardware installationFigure 16. Model 2635 home page Chapter contents Chapter 4 Ethernet LAN PortFigure 17. Ethernet LAN port IP address conﬁguration LAN ConnectionsEthernet Port IntroductionThe three conﬁgurable parameters are all either ‘true’ or ‘false.’ Figure 20. Conﬁgurable Ethernet parameters Chapter contents Chapter 5 Serial Port ConﬁgurationWAN Serial Port Conﬁguration Serial InterfaceVariables T1/E1 Interface Conﬁguration Web Interface ConﬁgurationWeb Conﬁguration. 2603, enter username See ﬁgure Conﬁguring the IPLink Series 2603 for T1 Operation5 Serial Port Configuration WAN Serial Port ConfigurationConﬁguring the IPLink Series 2603 for E1 Operation Line Options Fractional T1Line Code Choose from AMI or HDB3. Most E1 applications use HDB3 Frame Relay Configuration WAN ServicesChapter contents PPP ConfigurationWAN Services Conﬁguring the IPLink Series 2603 for E1 OperationFigure 26. E1 port conﬁguration WAN Service Conﬁguration PPP ConﬁgurationPPP Bridged Verify the settings to be Interface = LLC header mode = dialout Leave User name and Password blank. Click on CreatePPP Routed Remote site conﬁgurationLeave User name and Password blank. Click on Create Description PPP Routed Interface WAN IP address 192.168.164.2 6. Click on Create Figure 33. PPP link status LMI Conﬁguration LMI Management Frame Relay linksMgtPortDOWN - Currently the LMI on the DTE side is DOWN Web Conﬁguration MethodsDLCI Number Frame Relay ConﬁgurationRemote Site Conﬁguration Frame Relay bridgedFigure 36. Frame Relay Channel conﬁguration Central site conﬁgurationFrame Relay Routed Remote Site ConﬁgurationFigure 37. Frame Relay routed application Figure 38. Frame Relay routed conﬁguration Description FR routedFigure 39. Frame Relay Channel - Routed conﬁguration 10. Click on System Conﬁguration IP Routes Create new Ip V4 RouteCentral site conﬁguration Description FR routedFigure 40. IP route for Frame Relay routed application 10. Click on System Conﬁguration IP Routes Create new Ip V4 Route Enable NAT on this interface. In this example leave this option blankChapter SecurityChapter contents 7 Security 2. Click on Create a new serviceConﬁguring the router Introduction2. Click on the Create a new Ip route... hyperlink Conﬁguring the security interfaces Figure 45. Deﬁne ‘ip1’ interface as Internal Figure 44. Security conﬁguration home pageConﬁguring Security Policies Enabling the Firewall Firewall PortﬁltersDeleting a security Policy Add Raw IP Filter Security TriggersFigure 51. Conﬁguring TCP port ﬁlter for FTP Figure 52. Adding trigger for FTP data transfer 7 SecuritySecurity Triggers 2. Click on Conﬁgure Intrusion Detection Intrusion Detection System IDSMaximum TCP Open Handshaking CountDefault = Introduction to NAT Enabling NATGlobal address pool and reserved map 7. Click on Add Reserved Mapping Click on Add Global Address Pool buttonDHCP and DNS Conﬁguration Chapter contentsChapter Introduction Services and features normally associated with each otherDHCP Server ﬁgure 56 shows the entire conﬁguration web page for the DHCP server The ﬁrst two parameters are applicable when you will deﬁne the subnet Parameters for the DHCP Server subnetThe third parameter is IP Addresses to be available on this subnetDNS server option information Figure 59. Example based on default range of IP address poolFigure 60. Conﬁguration of the DNS server IP addresses Conﬁguration of the DHCP Relay Default gateway option informationAdditional option information DHCP RelayFigure 62. DHCP Relay webpage Conﬁguring the DNS Relay DNS RelayFigure 66. DNS Relay - conﬁguration completed Figure 65. DNS Relay conﬁguration webpageCLI Configuration Chapter 9 IP ServicesChapter contents IP ServicesIP Services WEB ServerCLI Conﬁguration System IP Service Associated Ports for the different System IP ServicesChapter contents Chapter 10 System ConﬁgurationAuthentication Update update the IPLink software from hereIntroduction Access the conﬁguration and status of the alarms Alarmcreating a Username deﬁning the Password add a comment useful to the administratorRemote Access Figure 73. Updating software UpdateBackup/Restore SaveFigure 75. Saving or reloading previously saved conﬁguration ﬁles Website SettingsRestart Figure 76. Restoring to factory defaultsSNMP Daemon Error LogSystem Tools Figure 79. SNMP Daemon conﬁgurationFigure 80. Ping and Traceroute utilities Chapter contents Chapter 11 SNTP Client ConﬁgurationFigure 81. SNTP synchronization and server IP address conﬁguration SNTP Client Mode Conﬁguration ParametersConﬁguring the SNTP Client IntroductionSNTP Client General Conﬁguration Parameters System Clock SettingFigure 83. Conﬁguration of the internal system calendar clock Chapter contents Chapter 12 System StatusPort Connection Status System StatusDeﬁned Interfaces LAN StatusWAN Status Hardware StatusStatus LEDs Status LEDsChapter contents Chapter 13 Contacting Patton for assistancePatton support headquarters in the USA Warranty Service and Returned Merchandise Authorizations RMAsWarranty coverage Contact informationRMA numbers Out-of-warranty serviceReturns for credit Return for credit policyChapter contents Appendix A Compliance informationCE Declaration of Conformity SafetyCompliance Radio and TV Interference FCC PartIndustry Canada Notice 2603 Model only Industry Canada Notice 2603 Model onlyChapter contents Appendix B SpeciﬁcationsT1/E1 Interface General CharacteristicsEthernet Sync Serial InterfaceProtocol Support Protocol SupportPPP Support Management48 VDC power supply DimensionsPower and Power Supply Speciﬁcations AC universal power supplyChapter contents Appendix C Cable RecommendationsEthernet Cable AdapterC Cable Recommendations Chapter contents Appendix D IPLink Physical ConnectorsD IPLink Physical Connectors RJ-45 shielded 10/100 Ethernet portRJ-45 non-shielded RS-232 console port EIA-561 Assuming the MDI-X switch is in the out positionSerial port V.35 M/34 and DB-25 ConnectorX.21 DB-15 Connector Signal Timing - AControl - B Table 11. T1/E1 Port E1/T1 RJ-48C ConnectorFigure 86. T1/E1 RJ-48C connector D IPLink Physical ConnectorsAppendix E Command Line Interface CLI OperationChapter contents Local VT-100 emulation Using the ConsoleCLI Terminology ethernet list transportsTo continue our example Administering user accounts Setting user passwordsAdding new users Changing user settings Controlling login accessControlling user access